Xelement Men’s CF-624 Armored Race Motorcycle Jacket Review
First, for full transparency, this is a solicited review. Leatherup.Com contacted me and asked if I would be interested in having them sending me some gear to review, and I said I’d be happy to. There is no payment or quid pro quo, other than that they’d send me stuff from time to time, and I’d review it.
What they sent me this week was the CF-624 Armored Race Motorcycle Jacket. I’m going to assume that the "Race" is merely a style name, and not referring to actual race use as this is a textile jacket, not a leather one. I can’t imagine anyone going to the racetrack and wearing anything but full-on leathers. But it certainly has a racing-style look to it, and is a fairly attractive jacket.
The outer shell is a 600-denier nylon "Tri-Tex" material, comparable in weight and thickness to the shells that Tourmaster/Cortech or Joe Rocket uses for their textile jackets. The jacket has removable CE armor pads at the elbows, shoulders, and back, with additional foam protectors sewn into the shell in front, and down the back. It comes with a quilted, insulated, zip-out liner for colder weather, and when the liner is zipped out, the inner shell of the jacket is fully lined with polyester. One thing I always look for is the back zipper for connecting the jacket to riding pants—an item usually missing in the Tourmaster stuff I’ve seen—but present and accounted for in the Xelement jacket.
For warmer weather, there are four zippered vents: two in the arms and two in the back, that open mesh-covered vents for airflow. The outside of each shoulder also mounts a polycarbonate external protector that has integral screened holes to allow additional airflow. Each side has nylon pull tabs with velcro closures to cinch the waist to your size.
The CE armor at the elbow and shoulder has a semi-rigid outer shell, with a softer impact-foam backing, while the back protector is a removable impact-foam pad. All of the armor is CE certified, however.
The bottom of each sleeve has a zippered closure for tightening, as well as velcro tabs.
The construction overall seems solid, with well-stitched and taped seams.
I would say it compares very well with the relatively more expensive gear from Tourmaster/Cortech, Joe Rocket, and even some of the Icon Motosports textile gear. For an $80 jacket, it seems like it’s a pretty good value, as that is about $50 less than comparable Tourmaster jackets.
There are a few cons. Personally, I’d like to see some additional, thicker cordura patches in the impact areas, as well as some adjustment snaps on the arms to tighten the elbow armor more firmly. Also, some reflective material would be nice, as this jacket has none at all. Having said that, I had a Harley-Davidson textile jacket that didn’t have those things—and no back protector besides—that cost double what this jacket costs.
One caveat about buying an Xelement jacket seems to be a common complaint that they run a bit small. I can confirm that. At 5’10" and 190lbs, I generally wear a size large, but this jacket in that size is a tight fit with the liner in, and just large enough to provide adequate freedom of movement without it. I’d recommend buying a size larger than you would usually wear.
A final thought. I am a bit of a fanatic about protection when it comes to riding gear. The least protective jacket I have is the Olympia Motosports jacket I reviewed a few months ago. It has more armor coverage, and 2000 denier cordura in all the impact areas. My second jacket is a full-on Dainese hard-armored jacket with a 1" thick hard back plate, and my hot weather jacket is a Pilot mesh jacket that I got before Pilot went back to making only custom race suits, and it has so much hard armor coverage that the mesh is essentially useless, as no air flows under the armor anyway. And, If I want to to wear an unarmored jacket, I have a Six-Six-One armor set that I wear underneath it. So, the Xelement jacket is not one I’d wear on a daily basis.
However, I realize that most of you aren’t as paranoid as I am about armor, and aren’t interested in shelling out $500 bucks for a Dainese jacket. So for the vast majority of you guys, this jacket will be perfectly fine. I’d say it’s every bit as good as a Cortech jacket at a much better price. It’s lightweight, comfortable, and better armored than many budget jackets. I would also note that a quick check of customer reviews at Amazon shows that—size issues aside—people rate this jacket well.
Oh, my chick also says it looks nice—and she’s far more of an authority on that stuff than I am.
Any messages transmitted to the administrator(s) or the author(s) of Dale's Motorcycle Blog, whether transmitted electronically or by any other means, may be reprinted at our discretion, and used for purposes of commentary, debate, satire, or humor. Transmission of such messages constitutes implied consent to publicly reprint such messages.